|
|||||||||||||||||
|
Detail |
| 9 Flash Patterns | Operating Time |
| Rotate | 7 hours |
| Quad Flash | 7 hours |
| Single Blink | 50 hours |
| Alternating Blinks | 7 hours |
| S.O.S. (Morse Code) | 12 hours |
| Steady on - high | 4 hours |
| Steady on - low | 30 hours |
| 2-LED Flashlight | 7 hours |
| 4-LED Flashlight | 5 hours |
Here are some typical situations where the LED Road Flares can be used:
On The Road:
As a road flare to slow down traffic or signal the need for traffic safety. An LED light makes a better road hazard marker than the flammable flares which are being banned by many states.
As a road construction flare to warn of road work, moving vehicles or other road hazards ahead. The amber safety light (red is also an order choice) is sure to get noticed by drivers.
As a detour beacon to signal a change in traffic conditions. It's a detour flare that will keep traffic moving.
As a movable detour LED light or road hazard flares. The strong magnet attaches to construction or highway trucks, cars, signs, or other magnetic metal surface. The blinking caution light will alert drivers to road work, accidents, or other road hazards.
In any situation calling for a road hazard LED light. It's strong and shock resistant and continues to operate even if cars or trucks drive over it.
These waterproof LED safety lights float, making them suitable for a myriad of marine uses, including boater emergency safety. Place and anchor on top of the water to designate a work zone or prohibited area.
The underwater scuba flares can be used by divers to mark an exploration or worksite site, or as an emergency flares to signal for help.
As an underwater flashlight. The LED Road Flare has nine different signal types, two of which serve as a LED flashlight.
Boaters equip their personal watercraft with the LED Road Flare to use as an emergency LED light to signal for help.
For emergency responders, this emergency road light is sure to slow or stop traffic. The emergency road flare is indispensable to police, firefighters, rescue personnel and others serving as emergency responders.
In the LED flashlight mode, police and firefighters can see better in dark or smoky areas.
As a police road flare when conducting traffic stops. The police LED light gets noticed and ensures traffic safety when in use.
As a military road flare on or off the base. The military LED light can be used for safety, traffic control, or cautionary measures.
As a flashing road light for making repairs on the side of a road, sidewalk, or other public space.
The flashing red light also is ideal for any construction site, utility work area, or other indoor or outdoor worksite where a blinking traffic light would be beneficial.
Whether driving a car, truck, boat or other vehicle, the LED Road Flare is an ideal emergency signaling device. Its versatile design allows it to lie flat on any surface or on its edge to accommodate any emergency signaling need.
On The Water:
On The Job:
For Personal Safety:
This road flare also complies with traffic and safety codes. For example, it meets the U.S. Department of Transportation, the Manual on Uniform Traffic Control Devices (MUTCD) and the National Fire Protection Association (NFPA) standards for traffic safety. And because no smoke vapors, ash, flames, or other harmful byproducts are created when in use, the LED safety light also meets tough state emission regulations, including California's VOC emission guidelines.
|
|
|
