IP68 Aluminum Solar Power Led Road Stud Led Road Marker Light Solar Lane Marker With Post

During the day, the Solar Road Stud absorbs sunlight and changes it into electrical energy. During

the night, it will automatically light up without external power sources,effectively catching the drivers' attention because of its bright lighting, the standard retro-reflective materials used and ensure

good visibility in darkness.

1.The road stud is produced by mould in one punch, no need to assemble, which greatly improve its load capability.

Solar battery, electronic component and LED indicators are sealed in road stud with special technique, the road stud

is strictly water proof, which can be used on ponding road for the long run.

2. Upside of the road stud is designed with embossed parallel stiffeners which strengthen the stud and protect

solar panel from being crushed by the wheels.

3.Additional wearresisting layer is increased on the upper surface, which prevents the surface from being wear away, and improve the efficiency of solar energy transfer.

4.Intelligent control IC, imported precision potentiometer, heat-resistant highvolume rechargeable batteries

are applied in the road stud, which ensure its service life and excellent performance.

5.LED indicators are mounted in one side or double side according to customers’ requirement.

6.The road stud is designed with handgrips and screw holes on both sides, which can be installed firmly on the road.

7.Easy to install.

8.The road stud is applicable to pavement, roadside edge, kerb stone, port and so on.

Specification of Road Studs

1.Mono-crystalline silicon solar panel 2.5V/120MA

2.NI-MH rechargeable battery 1.2V/800MAH

3.Charging:8 hours fully charged

4.Max Load Capacity>10 tons

5.Ligh source:φ5 LED( 3+3 leds)

6.Mode:Flash (2Hz±20%) 13 days or steady(constant) 3 days

7.Activate Condition:<500Lux

8.View Distance:>500m

9.Service Life>3 years

10.Working Temperature:-20℃～+70℃

11.Body size:132*122*75mmm；

12.Inner Box Size:147*128*80MM(1pc/box), 490g(1pc)

13.Carton size:685*452*255MM (45pcs), 23kgs

14. Install: double fix the road stud with adhesive and screw

make sure it will not loose under long term pressure