Winfys Industrial Limited

to provide great visibility for drivers at night and during bad weather conditions and prevent fatal accidents and serious injuries caused by hidden and hard-to-see center lines.

Reflective solar road markers is ideal warning light used to improve highway safety for both drivers and pedestrians. This Light control Aluminum Solar Led Road Marker can work automatically at night

according to the environment brightness.Microprism design can reflect automatically PC shell anti-impact, strong and durable. IP68 waterproof design, it can still work normally in the rain.

1. Features

1.The aluminum solar road stud‍ is produced by mould in one punch, no need to assemble, which greatly improve its load capability.Solar battery, electronic component and LED indicators are sealed in road stud with special technique, the road stud is strictly water proof, which can be used on ponding road for the long run.

2. Upside of the road stud is designed with embossed parallel stiffeners which strengthen the stud and protect

solar panel from being crushed by the wheels.

3.Additional wearresisting layer is increased on the upper surface, which prevents the surface from being wear away, and improve the efficiency of solar energy transfer.

4.Intelligent control IC, imported precision potentiometer, heat-resistant highvolume rechargeable batteries

are applied in the road stud, which ensure its service life and excellent performance.

5.LED indicators are mounted in one side or double side according to customers’ requirement.

6.The road stud is designed with handgrips and screw holes on both sides, which can be installed firmly on the road.

7.Easy to install.

8.The solar road stud is applicable to pavement, roadside edge, kerb stone, port and so on.

2. Specification for 2+2 Leds Solar Pavement Marker

1.Mono-crystalline silicon solar panel 2.5V/120MA

2.NI-MH rechargeable battery 1.2V/800MAH

3.Charging:8 hours fully charged

4.Max Load Capacity>10 tons

5.Ligh source:φ5 LED( 3+3 leds)

6.Mode:Flash (2Hz±20%) 13 days or steady(constant) 3 days

7.Activate Condition:<500Lux

8.View Distance:>500m

9.Service Life>3 years

10.Working Temperature:-20℃～+70℃

11.Body size:105*105*23mm；

12.Inner Box Size:120*120*50MM(2pc/box), 660g(2pcs)

13.Carton size:400*275*280MM (60pcs), 21kgs

14. Install: double fix the stud with adhesive and screw

make sure it will not loose under long term pressure

3. Specification for 3+3 Leds Solar Road Marker

1.solar panel 2.5V/120MA

2.NI-MH rechargeable battery 1.2V/800MAH

3.Flashing:13 days after fully charged

4.Max Load Capacity>10 tons

5.Ligh source:φ5 LED

6.Mode:Flash (2Hz±20%) or steady(constant)

7.Activate Condition:<500Lux

8.View Distance:>500m

9.Service Life>3 years

10.Working Temperature:-20℃～+70℃

11.Body size:105*105*23mm；

12.Inner Box Size:120*120*50MM(2pc/box), 660g(2pcs)

13.Carton size:400*275*2800MM (60pcs), 21kgs

14. Install: double fix the stud with adhesive and screw

make sure it will not loose under long term pressure

4. Advantages

Aluminum led solar pavement markers provide extreme durability for sensitive areas and Aluminum Solar Road Studs are designed to resist extreme impacts providing a long lasting durable road stud for all applications.Aluminum Solar Road studs are the most effective safety device for night time even under the most adverse weather conditions. Active Reflective aluminum led solar road studs provide optimum lane indication when visibility is dramatically reduced. Aluminum Solar road marker increases the visibility of intersections during low-visibility conditions and helps improve the road users recognition of intersection location and features.

Aluminum Solar Road Markers is an environmentally safe road delineation treatment visible

from up to 1 kilometre away. The aluminum solar road studs require no maintenance, mostly used to

delineate areas suffering poor visibility, pre-warn motorists of impending traffic calming treatments such as

traffic islands; roundabouts and speed humps or to delineate cycle and walking. paths, boat ramps and airport

taxiways and aprons.Solar Powered Aluminum Solar Pavment Marker are powered only by daylight. During the day ,they use their built-in solar cells to make their own electricity.There are no running costs; they must be the most environmentally friendly lights around, and requires no maintenance.